Digital wall clocks are versatile and can be used in almost any setting. However, for them to be of use, you’ll need to first set your wall clock to the proper time. Once you know how, setting or resetting a digital wall clock is not hard. These instructions will teach you how to reset your digital wall clock.

Step 1

To set the time on your clock, you’ll first need to locate your clock’s “setting” button. On BigTimeClocks models, this button will be the “A” button. Press and hold this button until the numbers on your clock begin to flash.

Step 2

When you see the hour numbers on your clock begin to flash, press and hold the “hour” button to advance the hours. On BigTimeClocks models, this will be the “B” button. Release the “hour” button when the clock reaches the correct number.

Step 3

Press the “setting” button (“A”) again, and the minutes will flash. Press and hold the “minutes” button (“B”) to advance the minutes to the correct value.

Step 4

If your wall clock has additional values like the year, month, day, and seconds, you can repeat the same process with these values. Use the “setting” button (“A”) to select which value you want to adjust, and then using the “B” button advance the numbers to the correct value.

Step 5

Once your clock shows the right time, press the “save” button to save the time and set the clock. On BigTimeClocks models, this will be the “C” button.

Learning how to reset your digital wall clock isn’t hard, although the instructions may vary slightly based on the brand or model of your digital clock. If you need additional guidance, identify your clock, and find its instruction manual online. You can find the instruction manual for any large digital wall-mounted clock made by BigTimeClocks by searching your clock’s name and model number on our website.